DX-C400 User Manual

Loading ...

4-37

FACSIMILE

Contents

USING THE DOCUMENT GLASS TO SEND A FAX IN

DIRECT TRANSMISSION MODE

When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.

Keys in the display can be selected with the arrow keys and the [OK] key.

Open the automatic document feeder,

place the original face down on the

document glass, and then gently close

the automatic document feeder.

• Align the middle of the original with the tip of the mark at

the middle of the scale on the left side of the document glass.

• Place the original in the appropriate position for its size as

shown above.

• When the original is a different size than the size setting, set

the original size.

☞

SPECIFYING THE SCAN SIZE AND SEND SIZE

(page

4-50

)

Do not place any objects under the original size detector. Closing the automatic document feeder with an object

underneath may damage the original size detector plate and prevent correct detection of the document size.

Enter the destination fax number.

(1) Select the [Address] key in the base screen.

For the [Address] key, see "BASE SCREEN OF FAX

MODE" (page 4-8).

(2) Select the one-touch key of the desired

destination.

(3) Select the [Basic Menu] key.

• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot

be used.

• In addition to specification by one-touch key, a destination can also be specified using a search number. You can

also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more

information, see "ENTERING DESTINATIONS" (page 4-19).

5-1/2" x 8-1/2"

(A5)

8-1/2" x 11" (A4)

mark

Document glass scale

OKBACK

AAA AAA

BBB BBB

CCC CCC

DDD DDD

EEE EEE

FFF FFF

GGG GGG

HHH HHH

III III

JJJ JJJ