Loading ...
Loading ...
Loading ...
Opening
• Press the unlocking button on the side of the lid
knob; the jaws will release
- Fig 1.
• Lift the lid off.
Closing
• Place the lid over the pressure cooker, ensuring
that it is sitting correctly on the pot.
• Press down on the locking button
- Fig 2
• It is normal for the lid to be able to twist round
whilst it is locked.
• The clamps must be in contact with the edge
of the lid.
If you are unable to close the lid:
• Make sure the jaws are fully open before fitting
the lid onto the pot.
• Check good condition and correct position of
the seal.
Control module*
The control module has been designed to make cleaning your pressure
cooker easier.
• Once the lid seal and the timer* have been
removed, the pot and lid can also be put in the
dishwasher.
• The control module contains all the parts which
enable your pressure cooker to function. As
soon as it is fixed on the lid, your pressure
cooker can be used normally.
To remove the control module from the lid
• Remove the timer*
• Turn over the lid.
• Loosen the screw holding the module using a
coin, while holding the module with your other
hand.
4
*depending on model
EN
Whenever opening
and closing the lid,
the control module
must always be
fixed onto the lid.
The jaws must be
flat on the edge of
the lid.
- Fig 3.
Loading ...
Loading ...
Loading ...