Loading ...
Loading ...
Loading ...
Using recording features
22
3.5 Using parking mode
Whentheproductisconnectedtothevehicleviathehardwiringcable,theoperatingmodeisswitchedto
parking mode after the engine or electrical accessories are turned off and the voice guide will indicate that
the parking mode has started.
• Parking mode operates only when the hardwiring cable is connected. The hardwiring cable must be
professionally installed to the vehicle by an Alpine authorized dealer/a trained specialist mechanic.
• To use all recording modes, you must insert a memory card into the product.
• Depending on the battery charging status of the vehicle, the duration of parking mode may differ. If you
want to use parking mode for an extended period, check the battery level to prevent battery depletion.
Refer to the following table to set the parking mode options.
Option Operation description
Motion
Detection
No motion
or impact
detected
Monitors movement in the area or impacts to the vehicle. Video will be recorded only
when motion or an impact is detected.
Motion
detected
When a moving objects is detected while parking, a video is recorded for 20 seconds
(from 10 seconds before detection to 10 seconds after detection) and stored in the
"motion_timelapse_rec" folder.
Impact
detected
When an impact is detected while parking, a video is recorded for 20 seconds (from
the moment 10 seconds before detection to 10 seconds after detection) and stored in
the "parking_rec" folder.
Time
Lapse
No impact
detected
A videos is recorded at a rate of 2 fps for 10 minutes, compressed into a 2-minute long
file, and stored in the "motion_timelapse_rec" folder. Since the video file recorded
with this option is small, you can record a long video.
Impact
detected
When an impact is detected while parking, a video is recorded for 100 seconds at
a rate of 2 fps (from the moment 50 seconds before detection to 50 seconds after
detection) and stored in the "parking_rec" folder after being compressed into a
20-second long file. (The buzzer will sound.)
Energy
Saving
No impact
detected
Monitors impacts to the vehicle. Video will be recorded only when an impact is
detected.
Impact
detected
When an impact is detected while parking, a video is recorded for 20 seconds (from
within 1 second after detection) and stored in the "parking_rec" folder.
OFF The product is powered off when electric accessories and the engine are turned off.
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.
You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time.
Loading ...
Loading ...
Loading ...