Loading ...
Loading ...
Loading ...
18 19
ACCESSORIES
Before using an accessory, check the manufacturer recommendations.
It is also recommend that you carry out a test on part of the fabric which cannot be seen.
1 • Fabric brush
The fabric brush opens the weave of the fabrics for better steam penetration.
Be sure unit is unplugged and completely cool before attaching accesories.
• Attach the fabric brush to the steam head by lining
up the bottom of the brush with the bottom of the
steam head. Gently push the top of the brush onto
the steam head until it clicks into place.
• Gently brush the area to be steamed with the grain
or nap of the fabric.
• Remove the fabric brush once unit is unplugged
and completely cool. Remove it by pressing on the
release tab on top of brush while pulling it forward.
2 • Lint pad
The lint pad is a separate accessory and cannot be attached to the steam head.You can
use the lint pad independently from the steamer.
The lint pad removes hair, lint and animal fur for a professional looking finish.
• To use the lint pad, slowly brush the clothing with the grain or nap of the fabric.
• The pad can be cleaned by brushing it in the opposite direction. We recommend cleaning the
pad on an old cloth that can be discarded.
• We recommend to use the lint pad before steaming your clothes for perfect results.
3 • Delicates steam cap
The steam cap cannot be used together with the fabric brush on the steam head.
Be sure the unit is unplugged and completely cool before attaching accessories.
The steam cap provides even distribution of steam,
filters impurities from the water and protects fabrics
from water dripping.
• Attach the steam cap to the steam head.
The steam head should be totally covered.
• Gently press the steam head with cap on the area
to be steamed.
• Remove the steam cap once the appliance is
unplugged and completely cool.
AFTER USE
• After using the garment steamer, switch off the appliance by pressing the pedal once again.
The power indicator light will go off, and you can then unplug the appliance.
• Hang the steam head in an upright position on the hook when not in use.
• Unlock the Roll & Press handle from its hook on the pole (fig. 21). Keep your hand on the
• Insert the handle into the locking hook on the pole and check that it is firmly locked (fig. 16)
• Hang the garments from the built-in hanger or from another hanger which may be suspended
from the hook located on the hanger rod (fig. 18-19).
• To steam trousers, we recommend that you also use the support with clips as indicated in
the illustration (fig. 20).
• Grasp the steam head with the steam vents pointing away from you.
•
Start steaming by brushing material lightly with the grain of the fabric in an up/down vertical motion.
• The vertical support panel helps keep the garment in place while steaming.
• Start at the top the garment and gradually move downward. Always steam in a vertical
position.
• Always be careful not to touch the hot steam.
• Always hang the steam head in an upright position on the hook when not in use.
• During use, the hose may make a gurgling noise. This is a normal occurrence due to
condensation. If the appliance begins to gurgle, rest the steam head on its support for a
few moments in order to direct any build-up of condensation into the appliance once again.
• During use, some water drips may appear on the telescopic pole. This is also a normal
occurrence due to condensation. To limit condensation, do not press the steam head too
heavily on the Roll and Press panel.
Tips for better results with your
garment steamer and Roll & Press system
• We recommend checking the garment care label for manufacturer
recommendations before steaming. We also recommend testing the garment
and effect on the garment on an unobtrusive area such as an inner seam.
• Button up shirt collars to prevent them from slipping on the hanger during
steaming (fig. 17).
• When steaming a shirt, begin with steaming the sleeves. Get hold of one sleeve
and cross it over the garment using the Roll & Press for vertical support (fig. 17).
• To steam the back of the shirt, lift up the shirt by the shoulders and turn it around
the hanger (fig. 19).
• To put crisp edges on trousers and shirts, press the steam head (without any
accessory) against the fabric and the vertical support.
• Gently press the steamer brush into fabric while making slow passes.
• Avoid contact between the steam head and silk or velvet.
• Certain garments are smoothed more easily on the reverse side.
• Heavy fabrics may need to be steamed for longer.
• If you are using the steam head at a position close to the ground, raise the hose
frequently in order to avoid the formation of condensation. A gurgling noise
may be heard if the flexible pipe is pinched.
• If no steam is produced, if a gurgling sound is heard or if water is dripping
through the holes of the steam head, raise the steam hose occasionally to
remove condensation inside.
• Be careful at all times.
9100021252-01 IS6300 M2-D2.indd 18 21/07/2016 10:41
Loading ...
Loading ...
Loading ...