Loading ...
Loading ...
Loading ...
5GB
Parts for Installation and
Connections
This parts list does not include all the package
contents.
Installation
Mount the unit on a flat surface.
Mount the unit where
The unit will not interfere with the normal
movements of
the driver.
The unit will not be exposed to direct sunlight
or hot ai
r from the heater.
The unit will not come into contact with a
driv
er/passengers or materials in your car since
the unit becomes hot during use.
Do not install the unit under the floor carpet,
where t
he heat dissipation from the unit will be
considerably impaired.
Mounting the unit
Prepare a mounting board that is thicker than 20
mm (
13
/16 in) since the supplied mounting screws
are all 20 mm (
13
/16 in) long. The unit can also be
mounted on the flat surface of your car without a
mounting board.
1 Insert the supplied mounting brackets
into the slits of the unit and secure them
with the supplied bracket screws .
2 Place the unit on the mounting board
and mark the two screw hole positions.
3 Drill a 3 mm (
1
/8 in) pilot hole at each
mark on the mounting board.
Installation and Connections
Main unit
×1
Power connection cable
×1
RCA input cord
×1
High level input cord
×1
Bracket
×2
Bracket screw
ø 2.6 mm × 6 mm
(
1
/8 in ×
1
/4 in)
×2
Mounting screw
ø 4 mm × 20 mm
(
3
/16 in ×
13
/16 in)
×2
Loading ...
Loading ...
Loading ...