Loading ...
Loading ...
Loading ...
Operating the appliance en
19
■ the è symbol lights up on the
display panel, it is not possible to
add more laundry.
To resume the programme, press the
A button. The programme will resume
automatically.
Notes
■ Do not leave the door open for too
long when adding more laundry as
water from the laundry may leak out.
■ For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add more laundry during this time.
Changing the programme
1. Press the A button.
2. Select a different program.
3. Press the A button.This starts the
new program from the beginning.
Cancel the programme
For programs at high temperature:
1. Press the A button.
2. To cool down laundry: Select '
Rinse.
3. Press the A button.
For programs at low temperature:
1. Press the A button.
2. Select 0 Spin/Drain//Spin/Empty
[.
3. Press the A button.
Programme end during rinse
hold
- - - - 0 appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the program by:
■ Pressing the A button or
■ Selecting a spin speed or setting the
program selector to 0 Spin/Drain//
Spin/Empty [ and then pressing
the A button.
Programme end
End appears on the display panel and
the A button indicator light is off.
Removing laundry/switching
off the appliance
1. Open the door and remove the
laundry.
2. Turn the program selector to Off .
The appliance is switched off.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■ Do not leave any items of laundry in
the drum.They may shrink in the next
wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate.
■ Always wait until the program ends,
as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
■ If the display panel goes off at the
end of a program, the energy-saving
mode is active.Press any button to
activate the panel.
Loading ...
Loading ...
Loading ...