Loading ...
Loading ...
Loading ...
en Operating the appliance
16
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 28
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it, before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
■ Temperature*,
■ The maximum load and the duration
of the program (alternately)
■ Energy consumption*.
*depending on the model
Change the programme
default settings
You can use or change the default
settings for this wash cycle.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
The settings are not retained after the
washing machine is switched off.
Default program settings ~ Page 13
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to the
items of laundry you are washing.
The settings can be selected or
deselected depending on how far the
program has progressed.
The button indicator lights will be lit if a
setting has been activated.
The settings are not retained after the
washing machine is switched off.
Additional program settings
~ Page 15
Placing laundry into the drum
:Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse items of laundry thoroughly
beforehand.
Loading ...
Loading ...
Loading ...