Loading ...
Loading ...
Loading ...
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
3. Insert the connector into the power
socket in the vehicle interior.
4. Correct the tire inflation pressure to at
least 2.0 bar.
– Increase tire inflation pressure: with
the ignition switched on or the en-
gine running, switch on the com-
pressor.
– Reduce tire inflation pressure: press
the button on the compressor.
5. Unscrew the connection hose of the
compressor from the tire valve.
6. Pull the connector out of the power
socket in the vehicle interior.
7. Stow the Mobility System in the vehicle.
Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor, refer to
page 175.
Reset the Tire Pressure Monitor, refer to
page 170.
Replace the nonworking tire and the sealant
container of the Mobility System promptly.
Tire chains
General information
The manufacturer of the vehicle has deter-
mined certain wheels and tires to be suita-
ble for operation on the vehicle. Mounting
of tire chains on these wheels and tires is
not permitted.
Safety information
Warning
With the mounting of tire chains on un-
suitable tires, the tire chains can come
into contact with vehicle parts. There may
be a risk of accident or risk of damage to
property. Do not mount tire chains.
Changing wheels/tires
General information
When using run-flat tires or a flat tire kit, a
wheel does not always need to be changed
immediately when there is a loss of tire in-
flation pressure due to a flat tire.
If needed, the tools for changing wheels are
available as accessories from a dealer’s
service center or another qualified service
center or repair shop.
Seite 282
MOBILITY Wheels and tires
282
Online Edition for Part no. 01405A2C458 - II/21
Loading ...
Loading ...
Loading ...