Loading ...
Loading ...
Loading ...
Venting the tank
1. Switch off drive-ready state.
2. Pull the switch to start the pres-
sure equalization.
The tank venting status is displayed in
the instrument cluster. In rare cases,
tank venting can last several minutes.
When tank venting has finished, a mes-
sage is displayed in the instrument clus-
ter. The fuel filler flap is released for
opening.
3. Open the fuel filler flap.
If it is not possible to open the fuel filler
flap after tank venting, pull the switch
again.
If it is still not possible to open the fuel
filler flap even after the switch has been
pulled, unlock the fuel filler flap man-
ually, refer to page 267.
Fuel cap
Opening
Before opening, vent the tank, refer to
page 266.
1. To open the fuel filler flap, press on the
rear edge, arrow. The fuel filler flap
opens.
2. Turn the fuel cap counterclockwise.
3. Place the fuel cap in the bracket at-
tached to the fuel filler flap.
Closing
Warning
The retaining strap of the fuel cap can be
jammed and crushed during closing. The
cap cannot be correctly closed. Fuel or fuel
vapors can escape. There is a risk of injury
or risk of damage to property. Pay atten-
tion that the retaining strap is not jammed
or crushed when closing the cap.
1. Fit the cap and turn it clockwise until
you clearly hear a click.
2. Press on the fuel filler flap until it en-
gages.
Emergency unlocking
It may be necessary in certain situations to
unlock the fuel filler flap manually, for in-
stance with an electrical fault.
Seite 267
Refueling MOBILITY
267
Online Edition for Part no. 01405A2C458 - II/21
Loading ...
Loading ...
Loading ...