Loading ...
Loading ...
Loading ...
1. "My MINI"
2. "Plan charging/climate control"
3. "Settings charging current"
4. "Level 1 (120V)"
Settings are stored. When you change
charging locations you also might need to
change the setting for charging.
Set the charge current strength at third-
party household sockets to the lowest level.
Stopping the charging process
The charging process can be stopped at any
time by removing the charging cable and
continued at a later time by connecting the
charging cable. This enables, for instance
the use of other loads on the power connec-
tion or prevents simultaneous high power
from multiple loads.
For removing the charging cable, refer to
page 259.
Continuing the charging process
If the charging process is interrupted, for
instance through a temporary power failure,
the charging process is automatically con-
tinued after the interruption.
Terminating the charging process
1. Remove the charging cable from the ve-
hicle, refer to page 259.
2. Stow the charging cable as required.
3. Close the charging socket flap.
4. Lock vehicle if it is unlocked.
Displays in the instrument
cluster
The charge state indicator light, refer to
page 151, shows the charge state of the
high-voltage battery in the instrument clus-
ter, if the ignition or drive-ready state is
switched on. If all bars are filled, the high-
voltage battery is fully charged.
Even if no bars are filled, the high-voltage
system is still under high voltage.
Information regarding the charging process
is shown on the charging screen.
Display Meaning
Instrument cluster without en-
hanced features:
Ring flashes orange: the charg-
ing process is being prepared.
Ring yellow: the charging proc-
ess is active or it will start at
the set time.
Ring flashes yellow: the charg-
ing process pauses.
Ring flashes red rapidly: fault in
the charging process.
Ring green: the charging proc-
ess is completed.
Instrument cluster with en-
hanced features:
Ring orange: the charging proc-
ess is being prepared.
Ring yellow animated: the
charging process is active or it
will start at the set time.
Ring yellow: the charging proc-
ess pauses.
Ring red: fault in the charging
process.
Ring green: the charging proc-
ess is completed.
End of charging time or set de-
parture time.
Departure time set.
Seite 263
Charging the vehicle MOBILITY
263
Online Edition for Part no. 01405A2C458 - II/21
Loading ...
Loading ...
Loading ...