Loading ...
Loading ...
Loading ...
Instrument cluster without enhanced
features: orange lights
Active Cruise Control
The number bars shows the selected
distance from the vehicle driving
ahead.
Camera-based cruise control, refer to
page 194.
Vehicle detection, Active Cruise Control
Indicator light illuminates: a vehicle
has been detected ahead of you.
Indicator light flashes: the condi-
tions are not adequate for the system to
work.
The system was deactivated but applies the
brakes until the driver actively resumes
control of the vehicle by pressing on the
brake pedal or accelerator pedal.
Yellow lights
Antilock Braking System ABS
The Brake Assistant function may
not activate. Avoid abrupt braking.
Take the longer braking distance
into account.
Have the system immediately
checked by a dealer's service center
or another qualified service center or repair
shop.
DSC Dynamic Stability Control
The indicator light flashes: DSC con-
trols the drive and braking forces.
The vehicle is stabilized. Reduce
speed and modify your driving style to the
driving circumstances.
The indicator light lights up: DSC has mal-
functioned.
Have the system checked by a dealer's serv-
ice center or another qualified service cen-
ter or repair shop.
DSC, refer to page 190.
DSC Dynamic Stability Control is
deactivated or DTC Dynamic Traction
Control is activated
DSC is deactivated or DTC is acti-
vated.
DSC, refer to page 190, and DTC, re-
fer to page 191.
Flat Tire Monitor FTM
The FTM signals a loss of tire infla-
tion pressure in a tire.
Reduce your speed and stop cau-
tiously. Avoid sudden braking and steering
maneuvers.
Flat Tire Monitor, refer to page 175.
Tire Pressure Monitor TPM
The indicator light illuminates: the
Tire Pressure Monitor reports a low
tire inflation pressure or a flat tire.
Follow the information in the Check Control
message.
The indicator light flashes and is then illu-
minated continuously: flat tires or tire pres-
sure losses cannot be detected.
– Interference caused by systems or devi-
ces with the same radio frequency: after
leaving the area of the interference, the
system automatically becomes active
again.
– TPM was unable to complete the reset.
Reset the system again.
– A wheel without TPM wheel electronics
is mounted: have it checked by a deal-
er’s service center or another qualified
service center or repair shop as needed.
Seite 141
Displays CONTROLS
141
Online Edition for Part no. 01405A2C458 - II/21
Loading ...
Loading ...
Loading ...