Loading ...
Loading ...
Loading ...
15
Technical data:
Right for improvements changes are reserved in the interest of technical progress.
distributors of this brewer.
Rated Voltage: 120V AC
Rated Frequency: 50Hz 60Hz
Rated Power: 1,420W
N.W./G.W.: 3.1/3.5 kg appr.
Pump Pressure: Max. 3 Bars
Water Tank Capacity: 45 oz
PROBLEM CAUSE SOLUTION
Temperature sensor does not
work properly.
The on/off button is flashing
Call service line.
1) The brewing is stopped
manually.
2) The handle or brewer head
is lift while the button is
flashing
Water spitting from the outlet
of the brewer head.
1) Leave the brewer to escape
steam/residual water
completely, in 20 seconds from
the brewing process is
interrupted.
It is normal, depending on
K-cup from different brand.
lift while the button is flashing
K-cup is shrinked after
brewing
Check to be sure that it is
plugged in securely.
Brewer does not have power
Plug into a different outlet.
No water in the reservoir.
The handle is lift.
Check to make sure there is
water in the reservoir
Close the handle, the 3
serving buttons will flash if the
handle is lift.
Brewer cannot brew
220-240V
Loading ...