Loading ...
Loading ...
Loading ...
wolfgourmet.com
|
9
Preparing the Blender
After unpacking the Blender, wash
everything except blender base in hot,
soapy water. Dry thoroughly. Wipe blender
base with a damp cloth or sponge. DO
NOT IMMERSE BASE IN WATER. Care
should be taken when handling cutting
blade assembly since it is very sharp. Refer
to care recommendations on page 14.
IMPORTANT: Blender jar and cutting
blade assembly are subject to wear
during normal use. Always inspect jar for
nicks, chips, or cracks. Always inspect
cutting blade assembly for broken,
cracked, or loose blades. If jar or cutting
blade assembly is damaged, do not use.
Call our customer care center to obtain
replacement parts.
Selecting Blender Settings
Select from four program settings or use
VARIABLE SPEED CONTROL for precise
speed control.
WARNING
Burn Hazard
Metal parts under blending jar get hot after
use. Do not touch.
GETTING STARTED
Settings
Programs are optimized for recipe categories and vary in blending speed and duration.
The Blender automatically stops at the end of the program.
1. Turn the Control Knob counterclockwise from OFF to one
of the following programs:
a. SMOOTHIE – Blends frozen or fresh smoothies.
Blender pulses three times at the beginning to chop
ice or frozen ingredients and then ramps up to run on
high for a total of 55 seconds. See SMOOTHIE tips
on page 13.
b. ICE CRUSH – Breaks ice into pieces small enough
for slushies or fine cocktails. Blender continuously
pulses from low to medium for 1 minute. See ICE
CRUSH tips on page 13.
c. PUREE – Gives a smooth, creamy consistency to
fruit or vegetables and a fine texture when grinding
grain and making powdered sugar. Blender slowly
ramps up from low to high, running for 1 minute,
15 seconds. See PUREE tips on page 13.
Loading ...
Loading ...
Loading ...