Loading ...
Loading ...
Loading ...
wolfgourmet.com
|
5
SAFETY PRECAUTIONS
IMPORTANT SAFEGUARDS continued
• When blending hot liquids or ingredients, remove center emulsion cap
assembly from the lid. Use caution: spray or excess steaming may cause
scalding and burns. Do not exceed the 6-cup (1420-ml) level. Always begin
processing on lowest speed. Keep hands and other exposed skin from the lid
opening to prevent possible burns.
• Ensure cutter assembly is tight and secure to jar. Injury can result if moving
blades accidentally become exposed.
• If the jar should twist or rotate when the motor is switched ON, switch OFF (
) immediately and tighten jar in collar or on blender base.
• Do not leave blender unattended while it is operating.
• Check that the appliance is OFF ( ) before plugging cord into wall outlet. To
disconnect, turn the control to OFF ( ); then remove plug from wall outlet.
To unplug, grasp the plug and pull from the outlet. Never pull from the power
cord.
• Do not use appliance for other than intended purpose.
• CAUTION! In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• Be careful if hot liquid is poured into the blender container as it can be
ejected out of the appliance due to a sudden steaming.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...