Loading ...
Loading ...
Loading ...
25
Rapid drying:
1. Leave the oven ajar, at an angle of
approximately 30 degrees.
2. Turn the function selector to position
v.
3. Reduce the oven temperature with the
temperature selector until 50° C is
displayed.
4. Duration: approximately 5 minutes.
5. Then switch the oven off.
Cleaning and Care – Main oven
After deactivating the hydroclean
system:
Cleaning tips:
❑ Never leave the residual water in the
oven for any length of time, e.g.
overnight.
1. Open the oven door and pick up the
remaining water with a large absorbent
sponge cloth.
2. Using the detergent-soaked sponge
cloth, a soft brush or a nylon scrubber,
wipe off the oven interior.
Stubborn soil remnants can be removed
with a cleaning scraper for ceramic
hobs.
Caution: Use the scraper carefully, and
do not apply the tool at too flat an
angle, because the enamel could be
scratched!
3. Lime deposits may be removed with a
cloth soaked in vinegar.
4. Wipe clean with clear water and dry with
a soft cloth (do not forget to wipe under
the oven door seal).
Cleaning tips:
❑ If the oven is heavily soiled, the
procedure may be repeated after the
oven has cooled.
❑ If the oven is heavily soiled with grease,
e.g. after roasting or grilling, we would
recommend rubbing any stubborn dirt
with detergent before activating the
oven cleaning function.
❑ After cleaning, leave the oven door ajar,
i.e., at a
30-degree angle, to allow the interior
enamel surfaces to dry thoroughly.
Loading ...
Loading ...
Loading ...