Loading ...
Loading ...
Loading ...
LOADING, STORAGE AND PASSENGER COMPARTMENT
* Option/accessory.
599
Fitting and removing cargo cover*
In the extended position, the cargo cover pre-
vents visual access to the cargo area.
Fitting cargo cover
Insert one of the cargo cover's end pieces
in the recess in the side panel in the cargo
area.
Then insert the other end piece in the
recess in the side panel on the opposite
side.
Press down the end pieces on both sides -
one by one.
> When a "click" is heard and the red
marking on each end piece has disap-
peared, the cargo cover is attached -
check that it is affixed securely.
4.
Fold the cargo cover's front panel forward
to eliminate the space between the cargo
cover and the rear seat's backrests.
IMPORTANT
The cover plate has two plastic parts that
act as support to hold it in place.
The plastic parts must not be used to hang
bags on. They are not designed for this
purpose and may break.
If the safety net* shall be used at the same
time as the cargo cover then the safety net
must be fitted first.
Removing cargo cover
In retracted position:
1. Depress the button on one of the retracted
cargo cover's end pieces and lift out that
end.
2. Angle the cover up/out carefully.
> The other end piece loosens automati-
cally and the cover can be lifted out of
the cargo area.
Related information
•
Operating cargo cover* (p. 600)
•
Recommendations for loading (p. 595)
Loading ...
Loading ...
Loading ...