Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
338
Limitations for camera and radar
unit
The camera and radar unit has certain limita-
tions – which in turn also limit those func-
tions that use the unit. A driver should be
aware about the following examples of limita-
tions.
Camera and radar
Blocked unit
The marked area must be cleaned regularly and kept
free from stickers, objects, shade film, etc.
The camera unit is placed inside the upper
section of the windscreen together with the
car's radar unit.
Do not place, stick or mount anything on the
inside or outside of the windscreen, in front of
or around the camera and radar unit – this
may interfere with camera and radar-based
functions. This may result functions being
reduced, being switched off completely or giv-
ing incorrect function responses.
If the driver display shows this sym-
bol and the message "
Windscreen
sensor Sensor blocked, see
Owner's manual", this means that
the camera and radar unit cannot detect other
vehicles, cyclists, pedestrians and large ani-
mals in front of the car, and that the car's
camera-based and radar-based functions may
be disrupted.
The following table presents examples of pos-
sible causes for a message being shown,
along with the appropriate action:
Cause Action
The windscreen surface in front of the camera and radar unit is
dirty or covered with ice or snow.
Clean dirt, ice and snow from the windscreen surface in front of the camera
and radar unit.
Thick fog and heavy rain or snow block the radar signals or the
camera view.
No action. Sometimes the unit does not work during heavy rain or snowfall.
Loading ...
Loading ...
Loading ...