Loading ...
Loading ...
Loading ...
Safety and Warning for a Treadmill - Power Requirements T400 (T401 & T402)
Safety and Warning for a Treadmill - Grounding Instructions
8
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 120 volt wall circuit, and has a grounding plug that looks like the
plug illustrated in the figure. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.
This product must be grounded. If the
treadmill’s electrical system should
malfunction or breakdown, grounding
provides a path of least resistance for electric
current, reducing the risk of electric shock.
This product is equipped with a cord having an
equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is
properly installed and grounded in accordance
with all local codes and ordinances.
A power strip should never be used. Extension cords should be avoided, but we
realize that in some cases an extension cord is needed. In this case, Appliance
Grade extension cords are available at most hardware stores. Buy only the
minimum length required; avoid anything longer than 6 feet. Try to find one made
with 12 gauge wire (3-wire is required). Do not use an adapter with your treadmill.
To reduce the risk of electric shock,
always unplug the treadmill from the electrical
outlet before cleaning or lightning storms.
It is recommended that your treadmill be plugged into a Dedicated 120V/15A
for home use. The treadmill must be connected to a grounded receptacle
having the same configuration as the plug. Do not modify the plug provided
with this product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
NOTE: DO NOT USE an GFCI wall outlet. A
treadmill uses the ground on the outlet to
disperse static electricity generated by it’s belt,
deck and motor design. Highly likely if using an
GFCI outlet, it will trip the breaker and shut down
the treadmill, potentially causing the treadmill’s
electronics failure or serious injury to the user.
Loading ...
Loading ...
Loading ...