Loading ...
Loading ...
Loading ...
44
MAINTENANCE
Broiler Pan and Grid
•
Do not store a soiled broiler pan or grid anywhere
in the oven.
•
Do not clean the broiler pan or grid in the self
cleaning mode.
•
Remove the grid from the pan. Carefully pour out
the grease from the pan into a proper container.
•
Wash and rinse the broiler pan and grid in hot water
with a soap-filled or plastic scouring pad.
•
If food has burned on, sprinkle the grid with cleaner
while hot and cover with wet paper towels or a
dishcloth. Soaking the pan will remove burned-on
foods.
•
Both the broiler pan and grid may be cleaned with a
commercial oven cleaner or in the dishwasher.
Oven Racks
Remove the oven racks before operating the Self
Clean cycle. Leaving the racks in place could cause
discoloration.
If the racks are cleaned in the Self Clean cycle, their
color will turn slightly blue and the finish will be dull.
After the Self Clean cycle is complete and the oven
has cooled, rub the sides of the racks with wax paper
or a cloth containing a small amount of oil. This will
make the racks glide more easily into the rack tracks.
Oven Cavity
DO NOT use oven cleaners.
NEVER wipe a warm or hot porcelain surface with a
damp sponge; it may cause chipping or crazing (tiny
hairlike cracks). Food spills should be cleaned when
the oven cools. At high temperature, foods react with
porcelain and a permanent dull spot can result. When
cleaning a spot, use only non-abrasive cleaners or
scrubbers.
Changing the Oven Light
The oven light is a standard 25-watt halogen bulb for
ovens.
WARNING
•
Make sure that the oven and bulb are cool.
•
Disconnect the electrical power to the oven at
the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
•
Wear gloves while changing the oven light.
Glass fragments from broken bulbs can cause
risk of injury.
•
Gently twist the screwdriver blade while
changing the oven light. If you apply force, the
glass or oven may crack.
To replace lamps located on the side wall:
•
Make sure oven and bulb are cool.
1
Unplug oven or disconnect power.
2
Remove oven racks.
3
Slide a flat blade screwdriver between the
housing and the glass light cover.
4
Support the glass light cover with two fingers to
prevent the cover from falling to the bottom of the
oven.
Glass Light Cover
Flat blade screwdriver
5
Gently twist the screwdriver blade to loosen the
glass light cover and remove it.
Housing
6
Remove bulb from socket.
7
Replace the bulb, and snap the light cover back
into place.
8
Plug in oven or reconnect power.
Loading ...
Loading ...
Loading ...