Loading ...
Loading ...
Loading ...
14 ENGLISH
◗ Starchy fruits, such as banana, avocado, and
fig, are not suitable for processing in the juice
extractor.
◗ Always switch on the appliance before you
put the fruit in the juice extractor.
◗ Switch the appliance off once in a while, to
remove pulp from the sieve and the sieve
holder or to pour out juice from the bowl.
◗ Do not process large amounts of fruit at the
same time. If the appliance starts to vibrate
heavily, or if juice starts to leak between the
bowl and the lid of the bowl, switch the
appliance off, remove pulp from the sieve and
the sieve holder, and pour out juice from the
bowl before continuing the process.
◗ Do not let the appliance run continuously for
more than two minutes. If you have not
finished extracting juice, switch the appliance
off and allow it to cool down for two minutes
before continuing.
Mill
Preparing the mill for use
Never use the mill for more than 30 seconds
without interruption.
C
1 Put the ingredients in the inverted beaker.
Process only dry ingredients. Do not fill the
beaker beyond the "MAX" indication.
C
2 Pick up the blade unit by the safety ring.
Place the blade unit in the beaker. Take care that
all grooves fit the ribs inside the beaker.
C
3 Press and turn clockwise until the blade
unit is properly fixed.
C
4 Turn the assembled mill upside down and
screw it onto the motor unit.
After processing, unscrew the mill from the
motor housing:
C
5 Pull the safety ring out and turn it anti-
clockwise. Then remove the blade unit.
The mill is suitable for grinding e.g. ingredients as
mentioned in the table. Do not exceed the
quantities!
Loading ...
Loading ...
Loading ...