Loading ...
Loading ...
Loading ...
23
The suggested value of 24h at 185° F (85°C)
appears in the display.
To set Stage 2cooking time with rotary selector:
1 Touch the $ symbol to adjust the duration of Stage
2cooking time 6 .
2 Set the desired Stage 2cooking time with the
rotary selector.
3 Touch the C symbol to adjust the end of Stage
2cooking time 5 .
4 Select the end time with the rotary selector.
5 Change the date if needed by touching the C
symbol to V .
6 Rotate the selector to the desired date.
7 Confirm settings by touching the ™ symbol.
To set Stage 2temperature:
1 Rotate selector to desired Stage 2temperature.
2 Start with I .
The temperatures of Stage 1and Stage 2appear in the
display. The remaining time to the beginning of
Stage 2is counted down in the display. The Yom Tov
screen will appear as shown.
The program will begin with the pre-set warm
temperature without light, then advance to the
programmed temperature with light until the end of the
set date and time, and then maintain the pre-set warm
temperature for 60 minutes.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to 0.
Switching off:
To cancel the operation, set the program selector to 0.
Personal recipes
You can save up to 50individual recipes. You can record
a recipe. You can assign these recipes a name so that
you can fall back on them quickly and conveniently if you
need them.
Recording a recipe
You can set up to five phases in succession and you can
record them.
1 Set the program selection to the required heating
function.
The i symbol is displayed.
2 Touch the i symbol.
3 Choose a free storage location with the rotary
selector.
4 Touch the g symbol.
5 Set the desired temperature with the rotary
selector.
6 The cooking time is recorded.
7 Recording another phase:
Set the program selection to the required heating
function. Set the required temperature with the
rotary selector. A new phase begins.
8 Once the appliance has achieved the desired
cooking result, touch the & symbol to end the
recipe.
9 Enter the name under "ABC" (see section “Entering
a name”).
Notes
‒ Recording a phase does not begin until the
appliance has reached the set temperature.
‒ Every phase must last at least one minute.
‒ During the first minute you can change the heating
function or the temperature.
6DEEDWKPRGH
)
)
)
Æ
)
Loading ...
Loading ...
Loading ...