Loading ...
Loading ...
Loading ...
ENGLISH
17
INSTALLATION
Step9: Connecting Drain
Hose
40"
(101.6 cm)
max.
12"
(30.5 cm)
min.
If the end of the drain hose does not fit the drain
line, use a heat and detergent resistant adapter
(not supplied). These may be obtained from a local
plumbing shop.
The two typical connections are shown. To prevent
siphoning, one of the following connections should be
used.
For disposal or waste
Tee connections
For air gap connections,
cut off drain hose at
dotted line
5
/
8
"
(16 mm)
3
/
4
"
(19 mm)
1"
(25 mm)
Drain Requirements
1
Follow local codes and ordinances.
2
Do not exceed 12 ft. (3.65 m) distance to drain.
3
Do not connect drain lines from other devices to
the dishwasher drain hose.
4
If an extension drain hose is required, use
5
/
8
"
or
7
/
8
" inside diameter, 2-3 ft. length hose and a
coupler for connecting the two hose ends.
Hose clamp Coupler Hose clamp
For drain hose installation, use the screw style clamp
provided with this dishwasher in the silverware
basket.
Connecting to Disposal with No Air
Gap
1
Remove the knockout plug with a hammer and
screwdriver.
2
Attach the drain hose to disposal with the hose
clamp provided. Move into position and tighten
the hose clamp.
Connecting Waste Tee with No Air
Gap
1
Remove the knockout plug with a hammer and
screwdriver.
2
Attach the drain hose to waste tee with the hose
clamp provided. Move into position and tighten
the hose clamp.
Loading ...
Loading ...
Loading ...