Loading ...
Loading ...
Loading ...
14
INSTALLATION
NOTE
The instructions for appliances connected to the
water mains by detachable hose-sets shall state
that the new hose-sets are to be used and that
old hose-sets should not be reused.
Water supply line
Electrical cable
6
1
/
2
" - 7
3
/
4
"
(165 mm - 197 mm)
Step4: Preparing Dishwasher
Remove the rear plastic shipping brace for clearance
and ease of installation.
CAUTION
Don't pull or lift the dishwasher using the handle;
doing so can damage the door and hinges. Open
the door and grab the body frame and the top front
opening of the tub to move or lift the dishwasher.
3
The wiring or cord must be grounded properly.
If in doubt, have it checked by a qualified
electrician. DO NOT connect any other appliance
to the same outlet.
4
The wiring or cord must be routed as shown
below.
5
Make sure the electrical cable is oriented in the
bottom channel as shown below.
NOTE
•
If you find any damage to the dishwasher,
please contact your retailer or contractor.
•
The included wire nut in 16AWG should be
used.
Electrical cable
4
1
/
2
" - 6"
(115 mm - 152 mm)
Step3: Preparing Water
Supply Connection
Make sure the house water supply is turned off before
connecting the dishwasher water lines.
1
This dishwasher must be connected to a hot water
supply with a temperature range between 120
°F (49 °C) and 149 °F
(65 °C). This temperature
range provides the best washing results and
shortest cycle time. To prevent damage to
dishes, the temperature should not exceed 149
°F (65 °C).
2
When connecting the dishwasher water line,
sealing tape or compound should be used on
pipe threads to avoid leaks. Tape or compound
should not be used on compression fittings.
3
The water supply tube must be located in the left
side channel as shown.
Loading ...
Loading ...
Loading ...