Loading ...
Loading ...
Loading ...
80
Valve Clearance
Servicing Your Honda
If it is necessary to make an adjustment,
loosen the adjusting screw lock nut ( ) and
turn the adjusting screw so there is a slight
resistance when the feeler gauge is inserted.
After completing the adjustment, tighten the
adjusting screw lock nut while holding the
adjusting screw to prevent it from turning.
Finally, recheck the clearance to make sure
that the adjustment has not been disturbed.
Apply oil to new O-rings.
Install the new O-rings onto timing hole cap
and crankshaft hole cap.
Install the timing hole cap and crankshaft
hole cap and tighten them.
Check that the mount rubbers in good
condition.
Install the mount rubbers onto the cylinder
head cover with the ‘‘UP’’ mark facing up.
Install a new gasket onto cylinder head cover.
Install the cylinder head cover.
Install and tighten the cylinder head cover
bolts.
6. 7.
8.
12
12/06/22 14:15:13 31KYKA00_089
Loading ...
Loading ...
Loading ...