Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
93
Connection to the water supply
Health risk and risk of damage
due to contaminated mains water.
The quality of the water used must
correspond to the drinking water
specification of the country in which
the washing machine is being
operated.
Always connect the washing
machine to potable water.
Risk of electric shock!
There are electrical wires in the water
inlet hose.
The inlet hose must not be
connected in an area subject to
spray water, e.g. in a bathroom or
shower room.
The washing machine must be
connected to a mains water supply in
accordance with current local and
national safety regulations.
The water connection pressure needs
to be between 100kPa (1 bar) and
1,000kPa (10 bar). If the water pressure
exceeds 1,000kPa (10 bar), a pressure
reducing valve must be installed.
A tap with a ¾inch threaded union is
required for the connection. If this is not
available, only a qualified plumber may
connect the washing machine to the
mains water supply.
The connection point is subject to
mains water pressure.
Turn on the tap slowly and check for
leaks. Correct the position of the
washer and union if necessary.
Maintenance
Only use a Miele Waterproof system
hose should you need a replacement.
Damage caused by dirty water.
This washing machine has a filter in
the hose connection to the casing to
protect the solenoid valve.
This filter must not be removed.
Loading ...
Loading ...
Loading ...