Loading ...
Loading ...
Loading ...
Problem solving guide
74
Fault messages at the end of a programme
Problem Possible cause and remedy
Intensive flow: Clean
the filter and jet
nozzle or remove
foreign objects from
the pump housing
The pumps are dirty.
Clean the pumps as described in “Problem solving
guide - Opening the door in the event of a blocked
drain outlet and/or power cut”.
Restart the programme after cleaning.
The jet in the top of the door ring is blocked with fluff.
Remove the fluff with your finger. Do not use any
sharp or pointed tools to do this.
Restart the programme after cleaning.
If the fault message appears again, contact Miele. The
washing machine can still be used but with reduced
functionality.
Align the machine.
Laundry not properly
spun.
The Pre-ironing Extra which runs at the end of the
programme could not be carried out properly.
Check whether the washing machine is aligned
correctly as described in “Installation – Levelling
the machine”.
Check whether the maximum delivery height of
1m has been exceeded.
If the fault message appears again, contact Miele. The
washing machine can still be used but with reduced
functionality.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
Loading ...
Loading ...
Loading ...