Loading ...
Loading ...
Loading ...
43
US
US
The Speaker System turns off automatically.
• If the menu setting item [AUTO STANDBY] is set to [ON], the Speaker System turns off automatically
if the Speaker System is silent and inactive for about 20 minutes. [AUTO STANDBY] appears on the
display window 1 minute before the Speaker System turns off.
• Unplug both speakers’ AC power cords (mains leads). Wait a little while, and then reconnect the
power cords, turn the Speaker System on again. If the problem persists, consult your nearest Sony
dealer or our customer support.
The Auto-standby function does not work.
• Check that the menu item [AUTO STANDBY] is set to [ON].
• When switching the input to the computer connected to the speakers to listen to the sound
source, the AUTO STANDBY function may not work properly because, depending on the
computer’s settings, the computer’s operation sounds may play.
The Walkman cannot be charged.
Check the following to see if the speakers are the cause.
• Make sure that the Speaker System is turned on (page 23).
• Check whether a digital cable for Walkman is being used to connect speaker A to the Walkman.
• Check whether [WM CHARGE] on the menu is set to [ON].
[PROTECT TEMPERATURE] appears in the display window.
• This appears if the internal temperature of the speakers rises abnormally. Check that the speakers’
ventilation openings are not covered and wait for a while. Press the (power) button to restore
the Speaker System.
[PROTECT WM CHARGE] appears in the display window.
• This appears if the digital cable for Walkman that is connected to the WALKMAN port is carrying an
abnormal current. Unplug the digital cable for Walkman, and then press the (power) button to
restore the Speaker System.
[PROTECT AMPLIFIER] appears in the display window.
• The speakers are malfunctioning. Unplug the AC power cords (mains leads) and consult your
nearest Sony dealer.
[PROTECT CLK ERROR] appears in the display window.
• Turn off the Speaker System. After unplugging the AC power cords (mains leads) for speaker A and
speaker B, firmly plug in the digital sync cable.
If the problem persists, the speakers are malfunctioning. Unplug the AC power cords (mains leads)
and consult your nearest Sony dealer.
Loading ...
Loading ...
Loading ...