Loading ...
Loading ...
Loading ...
33
US
US
Changing the Display Window
You can change the items shown in the
display window during playback by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button on
the remote control.
The display window switches to either the
normal playback display or input/output
signal display.
Normal playback display [NORMAL]
USB-B
-
40.0dB
Input jack/port name
Volume level
If the Speaker System is in protect mode,
[OVER] appears on the upper right of the
display window.
Input/output signal display [FORMAT]
PCM
44.1
kHz/16bit
D
S
D
11.2
M
Hz/
1bit
Format of the input signal
Sampling frequency of the input
signal
Bit depth of the input signal
Depending on the input signal, this may
not appear correctly.
Format of the output signal*
Sampling frequency of the output
signal*
Bit depth of the output signal*
Depending on the input signal, this
appears as 8 fs/32 bit due to processing
the 8x oversampling digital filter (page
37).
* The output signal shown indicates the
processing signal at the time it is output to the
S-Master HX Processing Block (page 37).
Using the Various Functions
Loading ...
Loading ...
Loading ...