Loading ...
Loading ...
Loading ...
11) Take the flat bracket (E) and place it between the two pencil
marks that you made in step 9
o Keeping the bracket in contact with the wall, use a pencil to mark
on the wall the anchoring holes that are cut out of the bracket.
12) Using an 8 mm drill bit, drill out two holes on the pencil markings
that you made in step 11. Insert rawl plugs into the holes and then
use a screwdriver to secure the fixing bracket to the wall.
o Refit chimney section (C) to the hood and fix it onto the hood using
the two screws that are supplied.
o Secure the top of chimney section (C) to the flat bracket, using the
screws provided.
22
Loading ...
Loading ...
Loading ...