Loading ...
Loading ...
Loading ...
16
The blue wire must be connected to the terminal marked “N”
The brown wire must be connected to the terminal marked “L”
If the product is going to be used in extraction mode,
then there should also be space to connect a ducting hose to the
Carry out all necessary masonry work prior to the fitting of the
Ensure that all electrical connections are carried out by a suitably
Before commencing installation of the cooker hood the grease filter
packaging or any other materials, such as packets of screws,
tective covering
should be placed over the worktop, hob top or cooker. This will help
for assembling the cooker hood. Cover that
surface with a protective covering and place all cooker hood parts
erials, in accordance with the type of wall and
ceiling. The wall and ceiling must be strong enough to take the
Do not tile, grout or silicone this appliance to the wall. This
appliance is designed to be surface mounted only.
o
(neutral), or coloured black.
o
(live), or coloured red.
Before beginning installation
o Check that the product purchased is of a suitable size for the
chosen installation area. In addition check whether there is an
electrical socket available that will be accessible once the hood is
mounted.
outside.
o
cooker hood.
o
qualified person.
o
should be removed.
o Check inside the product and ensure that there is no transit
guarantees etc. These should be removed and kept for future use.
o If possible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the rear wall and
ceiling. If this is not possible, then a thick, pro
to protect these surfaces from damage and debris.
o Select a flat surface
and fittings on to it.
o Rawl plugs are provided to secure the hood to most types of walls
and ceilings. However a qualified technician must verify the
suitability of the mat
weight of the hood.
o
Loading ...
Loading ...
Loading ...