Loading ...
Loading ...
Loading ...
Installation
IMPORTANT: Before installation and usage read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and freq me. The rating
e all the accident prevention regulations in force,
r normal use and the regular operation of the
l connection, using an omni-polar switch with a contact
RTHED. It should only
uency in your ho
plate can be found behind the grease filter.
15
The manufacturer declines all responsibility in the event of the installer
failing to observ
which are necessary fo
electric system.
Electrical connection
YOUR COOKER HOOD IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
o The cooker hood’s power cable must be fitted upstream from the
electrica
distance of at least 3 mm. THE FUSE MUST BE RATED AT 3
AMPS.
WARNING: THIS APPLIANCE MUST BE EA
be connected by a competent person, using fixed wiring via a double
pole switched fused spur outlet. (UK ONLY).
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
ith
colou
as follows:
w the I.E.E. and local regulations. The wires in the mains lead are
red in accordance with the following UK code:
Blue = Neutral, Brown = Live, Green/Yellow = Ground
If you only find two wires in the main’s lead (blue and brown),
then neither must be connected to the earth terminal.
As the colours of the wires in the appliano ce’s mains lead may not
correspond with the coloured markings identifying the terminals in
your spur box, please proceed
Loading ...
Loading ...
Loading ...