Loading ...
Loading ...
Loading ...
*
Keep the removed grille on a flat surface to prevent distortion.
What you can do with the speaker and remote control during playback
You can adjust the volume using the VOL (volume) –/+ buttons of the speaker or the VOLUME +/- buttons of the remote
control.
You can also use the MUTING button, (Play/Pause) button, and / (Previous/Next) button of the
remote control.
Note
If there is noise, turn off the iPhone/iPad/iPod once, then turn it on again.
The speaker supports only audio playback functions of an iPhone/iPad/iPod.
Do not connect a non-supported iPhone/iPad/iPod. Sony does not guarantee correct operation of a non-supported
iPhone/iPad/iPod.
Sony is not responsible for any loss or damage to data in an iPhone/iPad/iPod that is connected to the speaker.
Do not disconnect an iPhone/iPad/iPod during operation. To prevent damage to data, stop playback, then turn off the
power of the speaker before disconnecting the iPhone/iPad/iPod.
If sound is distorted, set the equalizer of your iPhone/iPad/iPod to “Off” or “Flat.”
Turn on the power of the iPhone or iPod touch before connecting it to the speaker; otherwise, operation will not be
possible.
Depending on the connected iPhone/iPad/iPod, loud sound may suddenly be output when the volume is adjusted.
For details on operation of the iPhone/iPad/iPod, refer to its operation manual.
When connecting to the wired network, USB function may not be available temporarily depending on the status of the
power supply of the router or network connection/disconnection. Wait until the USB function works after certain period
of time.
Related Topic
Parts and controls (Remote control)
Listening to music on a device via a USB connection (USB-A)
Notes on use
4-535-194-11(3)
Copyright 2014 Sony Corporation
248
Loading ...
Loading ...
Loading ...