Loading ...
Loading ...
Loading ...
2.
Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
3.
Adjust the drive chain. 2 P. 154
4.
Install and tighten the rear axle nut.
Torque: 100 lbf·ft (135 N·m, 13.8 kgf·m).
5.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20170830152249_31MKF6100_enu_BOOK Page 195 Wednesday, August 30 2017 15:45:50 JST
Tire Puncture u Removing Wheels
Troubleshooting
192
Brake caliper
bracket
Swingarm
Lug
Slot
Loading ...
Loading ...
Loading ...