Loading ...
Loading ...
Loading ...
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
8.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9.
Install the new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
11.
Fill the crankcase with the recommended
oil (2 P. 129, 2 P. 224) and install the oil fill
cap.
Required oil
When changing oil & engine oil
filter:
2.9 US qt (2.7 L)
When changing oil only:
2.6 US qt (2.5 L)
12.
Check the oil level. 2 P. 143
13.
Check that there are no oil leaks.
14.
Install the under cowl. 2 P. 142
20170830152249_31MKF6100_enu_BOOK Page 149 Wednesday, August 30 2017 15:45:50 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
146
Rubber
seal
Oil filter
Loading ...
Loading ...
Loading ...