Loading ...
Loading ...
Loading ...
Final Drive Oil u Changing Final Drive Oil
74
Maintenance
Changing Final Drive Oil
1.
Hold the motorcycle upright on firm level
ground.
2.
Place a drain pan under the drain bolt.
3.
Remove the oil fill hole cap, drain bolt,
and sealing washer to drain the oil.
u Discard the oil at an approved
recycling center.
4.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
5.
Fill the final gear with the recommended
oil. 2 P. 47
6.
Check the oil level. It should be flush
with the lower edge of the oil fill hole.
7.
Reinstall the oil fill hole cap and tighten.
8.
Check that there are no oil leaks.
Lower edge
Oil fill hole cap
Drain bolt
Sealing washer
Torque: 15 lbf·ft (20 N·m, 2.0 kgf·m).
Required oil: 4.1 US oz (120 cm
3
)
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
Loading ...
Loading ...
Loading ...