Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
66
Maintenance
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
8.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9.
Install a new oil filter and tighten.
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
11.
Fill the crankcase with the recommended
oil (
2 P. 46) and install the oil fill cap/
dipstick.
12.
Check the oil level. 2 P. 63
13.
Check that there are no oil leaks.
14.
Install the front lower cover.
Oil filter
Rubber seal
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
Torque: 25 lbf·ft (34 N·m, 3.5 kgf·m).
Required oil
When changing oil & engine oil
filter:
4.1 US qt (3.9 liters)
When changing oil only:
4.0 US qt (3.8 liters)
Loading ...
Loading ...
Loading ...