Loading ...
Loading ...
Loading ...
23
Operation Guide
4 Changing the setting of opening/
ending display by selecting normal or
special:
!a Press SEL button to select “OP/ED NR” or
“OP/ED SP.”
u Selecting “OP/ED NR” and pushing the
SET button returns to ordinary display.
u Selecting “OP/ED SP” and pushing the
SET button the first digit begins to blink.
!b Select the character you wish to enter by
pressing the SEL button.
u Pressing and holding the SEL button
advance the characters fast.
!c Press the SET button after the character you
wish to enter is appears.
u The next digit blinks.
!d Repeat steps 2 and 3 until you finish
entering characters.
u You can enter up to 8 characters.
!e To end the selection, press SET button.
The established setting can also be set by
turning the ignition switch to OFF.
The control is automatically switched from
the setting mode to the ordinary display if
the button is not pressed for about 30
seconds. Even in this case, established setting
is maintained.
Loading ...
Loading ...
Loading ...