Loading ...
Loading ...
Loading ...
9
Using the Remote Control
Turning your TV on and off
To turn your TV on: Connect the TV to an AC power outlet
and an external antenna, then turn on the power via
switch located below the front right hand side of unit.
•
Turning off to standby mode: Press [ STANDBY ] for a
few seconds to turn on the TV or put the TV in standby
mode.
•
Power indicator: Light indicates standby mode.
NOTE
Turn the power switch off when you do not intend to
use the TV for long periods, for example overnight.
Remove the connection from the wall power outlet if
you do not intend to use the unit for longer periods,
for example if you plan to be away a few days. Wait at
least 5 seconds after turning off if you want to re-start
the TV.
Selecting the Input Source
•
Select the Input Source depending on the video device
you have connected to your TV.
•
To select the Input Source:
Press [Source] button. When the list of Input Source
appears, press [▲/▼] to select the source, then Press
[OK] to connect.
Adjusting the volume
Press [VOL˄/VOL˅ ] to increase or decrease the volume.
Press [ Mute ] to turn the sound off. Press [ Mute ] again
to turn the sound back on.
Changing channels
Press the [CH Λ/CH V] buttons to go to the next higher
or lower channel. Or, Press the number buttons to select
a channel. For example, to select channel 12, press [1],
then press [2].
Selecting the sound mode
Press the [Sound] button to select between 4 different
pre-adjusted sound modes: Standard, Music, Personal
and Movie.
Selecting the picture mode
Press the [Picture] button to select between 4 different
pre-adjusted picture modes: Standard, Mild,Personal and
Dynamic.
Selecting the aspect ratio
Press the [Zoom] button to change the screen aspect
ratio among Auto, 4:3, Full, Zoom1, Zoom2.
NOTE
The option of aspect is vary with different source.
Freezing a picture
Press the [Still] button to freeze the image at any
moment.
Press again to resume normal motion.
Setting the sleep timer
You can specify how long you want your TV to wait for
before it automatically turns off.
Pressing [Sleep] button repeatedly will allow you to
change the sleep timer mode: Off, 5 minutes, 15 minutes,
30 minutes, 60 minutes, 90 minutes, 120 minutes, and
240 minutes.
Audio function
Pressing [ I/II ] button the TV screen will display the Audio
options such as Stereo/Dual I/Dual II/Mixed.
Displaying Channel List
Press [OK] to display the full list of digital and analogue
channels available.
Electronic Programming Guide (EPG)
Provides convenient access to the television programs
that will be available in the next 7 days. The information
displayed by the EPG is made available by the
commercial television networks for digital channels only.
The EPG also provides a simple way to program the
recording of your favorite programs. There is no need to
setup complicated timers.
Press the button EPG in the remote control to enter EPG
menu.
Press the [Red] button to display previous date.
Press the [Green] button to display next date.
Press the [Yellow] button to see the setting you have
done before.
Press the [Blue] button to set reminder for the program
you want to watch.
Loading ...
Loading ...
Loading ...