Loading ...
Loading ...
Loading ...
Assembly / Owner’s Manual
24
Moving Your Machine
The tness machine weighs approximately 119 kg (263 lbs) when fully assembled and requires caution when being moved. Use the Transport
Handle found under the rear of the machine to move it. To get access to the Transport Handle, turn the Levelers until you have sufcient clearance
between the machine and oor.
Your machine can be rolled on the transport wheels to a new location. Lower your machine slowly into its new location without injury to your head or
ngers.
Do not use the handlebars, Console Mast, or the Console to lift or move the machine. Injury to you or damage to the machine can
occur.
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and
others are all physically t and able to move the machine safely.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may hamper your ability to
move freely. A rubber mat should be used below the machine to prevent the release of static electricity and protect your ooring.
To prevent unsupervised operation of the machine always turn the power switch to Off and disconnect the power cord from the wall
outlet and machine power input. Place the power cord in a secure location.
Adjustments
Adjustments
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the
Rail Assembly is slightly off the oor. To adjust:
1. Place the machine in your workout area.
2. Safely stand on the back of the Rail Assembly for approximately 20
seconds.
3. Step off the machine.
4. Loosen the locking nuts and adjust the levelers until they all contact the
oor.
Do not adjust the levelers to such a height that they detach or
unscrew from the machine. Injury to you or damage to the
machine can occur.
5. Adjust until the machine is level. Tighten the locking nuts.
Make sure the machine is level and stable before you exercise.
Loading ...
Loading ...
Loading ...