Loading ...
Loading ...
Loading ...
30
EN
Important Hints on Installation
• The ceramic cooker hob must be installed by qualied personnel or technicians.
• The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers
and rotary dryers. The ceramic cooker hob shall be installed such that better heat
radiation can be ensured to enhance its reliability.
• The wall and induced heating zone above the work surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
• A steam cleaner is not to be used.
WIRING DIAGRAM
• If the cable is damaged or needs replacing, this should be done by an after-sales
technician using the proper tools, so as to avoid any accidents.
• If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3 mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and
that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a properly qualied
person.
Black
Brown
Grey
Blue
Yellow/Green
Power cord
Power cord
Power cord
Black
Brown
Grey
Blue
Yellow/Green
Black
Brown
Grey
Blue
Yellow/Green
Input Input Input
Loading ...
Loading ...
Loading ...