Loading ...
Loading ...
Loading ...
22 Cleaning & maintenance
Connected milk
container
If the double milk tube is used, the frother does not need to be rinsed manually, because the
easyclean
+
rinsing program rinses it automatically after the set time (see Chapter 7.1. on page
17) without having to remove the double milk tube from the milk source.
However, manual flushing is possible. Proceed as follows:
Select and confirm the instruction with the rotary dial / by touching or
In the MAINTENANCE menu, select the menu option RINSE FROTHER
It is not necessary to remove the tube end from the connected milk source
Put a sufficiently large container (≥ 0.5 l) under the height-adjustable outlet and confirm
with the rotary dial / by touching
The machine starts the rinse process. As soon as the rinse cycle is ended, the machine heats
up and is then ready for operation again.
Even when the machine is switched off, the frother is automatically rinsed by easyclean
+
if the
double milk tube is used.
After switching off the machine, make sure to rinse the connection (valve) of the double
milk tube under cold, clean water.
8.2. Clean frother
A message / instruction is shown on the display when the frother has to be cleaned.
Select and confirm the instruction with the rotary dial / by touching or
In the MAINTENANCE menu, select the menu option CLEAN FROTHER
CAUTION
The runnin proram must not be inter-
rupted!
Both the single milk tube and the double
milk tube can be used for the cleaning
program.
CAUTION
If the double milk hose is used, it should
be used for cleaning, as the valve must be
cleaned regularly. After cleanin, the valve
must always be rinsed with cold, clear
water (see Chapter 8.7. on page 26).
Loading ...
Loading ...
Loading ...