Loading ...
Loading ...
Loading ...
10 Initial startup
Test strips Deree of
hardness
Water hard-
ness display
≤
1 red point
1 - 7° DEGREE 1
2 red points 8 - 14° DEGREE 2
3 red points 15 -21° DEGREE 3
(factory setting)
≥ 4 red points > 21° DEGREE 4
Example: Water hardness
display DEGREE 3
FILL WATER
TANK
Operation without filter
(factory setting)
Set the menu to INSERT FILTER?
Set NO and confirm with NEXT
When using the machine without a
filter, the water hardness must be
entered in the next step.
Operation with filter
Set the menu to INSERT FILTER? Set
YES and confirm with NEXT
NOTE
If used with a filter, the machine does not need
to be descaled as often.
Set water hardness*
Immerse supplied test strip briefly in water, shake it off and read the test result after
about 1 minute
In the menu, select the water hardness read from the test strip and confirm with NEXT.
Fill water tank (> 0.7l)
Remove the water tank and fill it with fresh, cold water without carbonation (no mineral
water), reinsert the tank.
Do not fill any carbonated liquids or any other liquids, or the warranty is void!
Fill coffee bean holder
Fill the coffee bean holder with untreated, roasted coffee beans without foreign objects
or dirt and without sugar, then close the flavour protection cover well
* For operation without filter
FILL COFFEE BEANS
Loading ...
Loading ...
Loading ...