Loading ...
Loading ...
Loading ...
CARE AND CLEANING
(continued)
Light Bulb Replacement
Fresh Food Compartment-Upper Light
1.
Unplug refrigerator.
2. For easiest reassembly, turn knob to OFF,
then pull it off.
3. Pull the bottom of the light shield down and forward,
then rotate the top up and off.
After replacing with same size bulb, reinstall light shield
and set knob to the position it was in before, or set knob
at “5”.
Fresh Food Compartment–Lower Light
(on some models)
This light is located behind a shield at the rear
of the fresh food compartment
1. Grasp the top edge of the shield and lift it up
and forward to free its top edge.
2. After replacing with the same size
the top of’ the shield back in place.
bulb, hook
Freezer Compartment
1.
Unplug refrigerator.
2. Remove shelf just below
light shield. (Shelf’ will
be easier to remove if it
is emptied first.)
3. Pull plastic light shield
toward you.
(It
will
bend to free tabs from
grooves.)
4. After replacing with
same size
bulb,
reinstall
shield and shelf and
plug refrigerator back in.
Refreshment Center
1.
Unplug refrigerator.
2.
Ouen
fresh food compartment door, remove top
P~rta-Bin
and raise Refreshment Center inner door.
3. Press sides of flexible light shield to release locking
tabs and allow the shield to swing down.
4. Unscrew burned-out bulb and replace it with
night-
light bulb of same wattage.
5. Place rear tab of light shield into door and rotate
shield up until tabs lock into slots above.
6. Plug refrigerator back in.
Behind Refrigerator
Care should be taken in moving your refrigerator away from the wall. All
types of floor coverings can be damaged, particularly cushioned coverings
and those with embossed surfaces. Pull the refrigerator straight out and
return it to position by pushing it straight in. Moving your refrigerator in a
side direction may result in damage to your floor covering or refrigerator.
When pushing the refrigerator back, make sure you don’t roll over the
power cord or
icemaker supply line.
20
Loading ...
Loading ...
Loading ...