Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
37
Type 1
Unscrew the hexagonal nut in the front of the regulator. The
regulator nut has a plastic snap-in converter device on the
underside (Fig.8.6). To convert the regulator snap the device
out of the nut and replace the other way up.
The snap-in converter device is marked to show which gas it
is set for (Fig.8.7). Make sure the device is secure in the base
of the nut and replace the nut to the regulator.
Type 2
The regulator has a bayonet mounted top cap (Fig.8.8).
Using a small coin, press in and turn the cap to remove it.
Turn the cap over so that the letters “LP” are visible on base of
the hollow in the cap. Replace the cap making sure that the
bayonet pins are securely located (Fig.8.9).
Stick on Label
Stick the “NOW ADJUSTED FOR LP GAS” label next to the
ratings label inside the drawer cavity to indicate the gas the
appliance is now set for (Fig.8.10).
ArtNo.102-0007 - Maxitrol converter device positions
ArtNo.103-0006 - Maxitrol cap & converter
Nut
Snap-in converter device
ArtNo.102-0008 - Regulator cap
ArtNo.102-0010 - Adjusted to LP gas label
ArtNo.102-0009 - Gas regulator settings
Type 1 Type 2
Fig.8.6
Fig.8.7
Fig.8.8
Fig.8.9
Fig.8.10
Loading ...
Loading ...
Loading ...