Loading ...
Loading ...
Loading ...
- 25 -
E. Start Treatment
After all parameters are set, to increase the intensity and start treatment,
slowly turn the dial for the corresponding channel clockwise and waiting
2-3 seconds in between each increase to ensure the stimulation reaches
a strong but comfortable stimulation.
NOTE: If the stimulation should ever become uncomfortable, turn the
dial counter clockwise until a comfortable stimulation is reached.
WARNING
1) Should an emergency occur, press the power button and the
device will completely power OFF and stop all stimulation.
2) DO NOT remove electrodes from treatment area until the
device is turned off.
5.4 To Set EMS parameters
Choose EMS Mode by pressing . EMS and “S” for Synchronous will
display on the screen. To choose “A” for Alternate, press again.
A. Set Ramp Up/Down Time
Press once and the number for “Ramp” on the LCD Screen will ash.
To change the number, press or until the desired ramp time is
reached.
If the default Ramp time is the desired time and no change is needed,
press
to move on to the next parameter.
Loading ...
Loading ...
Loading ...