Loading ...
Loading ...
Loading ...
12
Starting the Cleaner
1. Make sure the patio cleaner is connected with a
proper water source. Slide the battery into the battery
compartment until it clicks and locks into position
(Fig. 11).
2. Turn the water supply tap on completely.
3. Determine the direction you want to clean and adjust the
spray wands accordingly. Rotate the spray wands to the
back of the machine to clean the rear area. Rotate the spray
wand to the front of the machine to clean the front area.
Rest the spray wands in the slots located on the front and
the back of the machine (Fig. 12).
4. Make sure the water ow regulation valve is set to the
minimum ow position (front), press the safety lock button,
and squeeze the On/O switch. When the appliance is
running, release the safety lock button (Fig. 13).
5. Use the control panel to set the appliance in desired
direction and brush speed. If the rear area needs to be
cleaned, set the appliance in backward mode (Fig. 14).
If the front area need to be cleaned, set the appliance in
forward mode (Fig. 15) Make sure the spray wands are
placed in the corresponding position.
Fig. 11
Battery pack
Fig. 12
Spray
wands
Front slot
Back slot
Fig. 13
Safety lock button
On/Oswitch
Fig. 14
CLEAN THE REAR AREA
Backward
mode
Spray wands
Fig. 15
CLEAN THE FRONT AREA
Spray wands
Forward
mode
Loading ...
Loading ...
Loading ...