Loading ...
Loading ...
Loading ...
10
Pole Assembly
1. Slide the upper pole into the lower pole assembly. Align
the screw holes (Fig. 4).
2. Insert the bolt from the back of the pole through the
aligned holes in the poles and secure the front end with
the knob (Fig. 4).
NOTE: You may have to carefully move the wiring inside
the tube to one side if it blocks the path of the bolt.
3. Loosen the auxiliary handle knob and set the auxiliary
handle in a comfortable working position. Lock the
auxiliary handle knob securely (Fig. 5).
NOTE: The auxiliary handle can be set to 7 angles in 30º
increments. Select the optimal position based on the
project's need.
Connect to Water Source
The patio cleaner can be connected with spigot by a regular
garden hose with the included garden hose adapter. Follow the
instruction below for a secure connection.
mWARNING! The patio cleaner must only be used with
clean water; use of unltered water containing corrosive
chemicals will damage the patio cleaner.
mWARNING! The intake water temperature must not
exceed 95ºF/35ºC.
1. Before connecting to water source, make sure the water
ow regulation valve is set to the minimum setting
(Fig. 6).
2. First, connect the patio cleaner with the provided garden
hose adapter. Pull down the collar of the garden hose
adapter and t it onto the water inlet adapter. Release
the collar to lock the adapter in place. Then connect the
garden hose to the garden hose adapter. Twist tightly to
secure (Fig. 7). Rest the garden hose on the garden hose
supporter, and use the Velcro band attached to the hose
supporter to x the garden hose in place (Fig. 8).
Fig. 3
Wheel frame assembly
Wheel frame knob
Fig. 4
Upper pole
Lower pole
Pole knob
Bolt
Fig. 5
Auxiliary
handle
Auxiliary
handle knob
Fig. 6
Waterow
regulation valve
Loading ...
Loading ...
Loading ...