Loading ...
Loading ...
Loading ...
Step 1
Once brewing is complete, lift the Brewer Handle and
carefully remove the Vue
™
pack by holding the outer rim.
The Vue
™
pack will be HOT after brewing. Use
caution when removing. Allow it to cool completely
before handling.
SECTION 7
Troubleshooting
SOLUTION
• Make sure that the Power Button has been turned on and
Touchscreen is illuminated.
• Plug Brewer into an independent outlet.
• Check to be sure that it is plugged in securely.
• Plug into a different outlet.
• Reset the circuit breaker if necessary.
• After placing the Vue
™
pack in the Vue
™
pack Holder, make
sure the Handle is pushed down securely and the Touchscreen
displays the beverage options. Push the flashing “BREW”
Button.
• If the Touchscreen indicates “Please Add Water,” add water to
the Water Reservoir or make sure the Water Reservoir is seated
properly in its base.
• If the Touchscreen indicates “Please Add Water” even after
refilling, contact Customer Service at 1.888.CUP.BREW (287.2739).
• The Brew Head may need to be cleaned or the Brewer may need
to be de-scaled (refer to pages 20 and 21).
• Clean the Brew Head if necessary (refer to page 20).
• The Water Reservoir may have been removed during brewing.
Replace the Water Reservoir and perform cleansing brews
(refer to page 15) without a Vue
™
pack.
• De-scale the Brewer (refer to page 21).
• If you have repeated the de-scale procedure on your Brewer
two times and it is still only brewing a partial cup, contact
Customer Service at 1.888.CUP.BREW (287.2739).
• Check to make sure that the “On/Off Time” and/or “Auto Off”
settings have not been set. Please refer to pages 17 and 18 for
instructions.
• The water level is low and a full cup cannot be brewed.
Add water to Water Reservoir.
• If the water level is not low, remove the Water Reservoir and
empty the water. Then thoroughly clean (refer to page 20). Fill
the Water Reservoir to the “MAX FILL” line and then return it to
the Brewer and ensure it is seated properly in its base. Wait for
the Water Reservoir light to stop flashing.
• Please refer to pages 24-27
• If power is interrupted to the Brewer by unplugging it, or if
power is lost, follow the procedure on page 17 to set the clock.
SITUATION
Brewer does not
have power
Brewer will
not brew
Brewer brews only
a partial cup
Brewer shuts
off or turns on
automatically
Water Reservoir
light is flashing and
the Touchscreen indicates
“Add Water”
Vue™ pack does
not have MyBrew
™
The Time is not displayed
on the Touchscreen
SECTION 6
Recycling Vue
™
Pack’s Plastic Cup
Recycle your Vue
™
pack’s plastic cup wherever #5
plastic is accepted. #5 plastic may not be recyclable in
your community today, so please check locally with
your municipality or waste hauler, or visit
www.vuerecycling.com for more information about
recycling your Vue
™
pack’s plastic cup.
Simply follow these simple steps:
Step 3
Once separated, discard the lid and the attached filter.
Recycle your Vue
™
pack’s plastic cup wherever #5
plastic is accepted.
Step 2
Once cool, separate the lid and filter from the cup.
The filter will adhere to the lid.
23
22
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...