Loading ...
Loading ...
Loading ...
49-5000454 Rev. 0 7
Using the Remote Control
Remote Control may differ in appearance from the image show.
NOTE: Please remove the back of the controller and insert two
AAA batteries. Replace batteries after 6 months of use or when
remote control starts to lose power.
NOTE: DO NOT mix old and new batteries.
1. POWER
Press the power button to turn on the air conditioner.
When you first press the power button, the air conditioner
will operate in Energy Save mode, Quiet fan speed and
temperature of 72°F. You can select any other mode to
satisfy your needs .
2. SPEED
High - Press HIGH button to choose high fan speed.
Med - Press MED button to choose medium fan speed.
Quiet - Press QUIET button to choose quiet fan speed.
Auto Cool - Press AUTO button to choose auto cool fan
speed.
3. MODE
Fan- Press the FAN button to activate fan mode.
Cool - Press the COOL button to activate cool mode.
E-Save Press the ENERGY SAVE button to activate mode.
Dehum - Press the DEHUM button to activate dehum mode.
4. TIMER
To set the air conditioner to turn off after a set amount of
time between 1 hour and 24 hours (unit must be ON):
1. Press TIMER ON/OFF button on the remote control to
select the time off function.
2. Press the TIMER UP or TIMER DOWN arrow button to
change the delay time from 1 hour to 24 hours. Timer OFF
indicator light on the air conditioner panel will illuminate.
3. The buzzer beeps twice after 5 seconds, then Timer OFF
countdown will initiate.
To clear TIMER Program:
NOTE: Air conditioner can be either on or off.
Press TIMER ON/OFF button until Timer indicator light turns
off.
5. TEMP UP/TEMP DOWN
• Press the TEMP UP button to raise the temperature. Each
time you press the TEMP UP button, the temperature will
go up 1° F until it reaches 86°F (30°C).
• Press the TEMP DOWN button to lower the temperature.
Each time you press the TEMP DOWN button, the
temperature will go down 1° F until it reaches 61°F (16°C).
6. SLEEP
1. Press SLEEP button on the remote control to choose
Sleep mode. This display will show (08) and the indicator
light will turn on.
2. The temperature will increase by 2° F one hour after the
mode is chosen. The temperature then increases another
2° F after one hour. The until will hold this temperature for
six hours then stop.
3. To turn off Sleep mode, press the SLEEP button until the
indicator light is off.
7. FAHRENHEIT/CELSIUS
• Press the F/C button to choose between Fahrenheit and
Celsius.
8. LOCK
• Press the LOCK button on the remote control to disable
button functionality. Press the LOCK button again to
activate the remote control functionality.
9. LIGHT
• When you press the LIGHT button, the display on the unit
will turn off, but the unit is still operating normally. When
you press the LIGHT button again or press any button on
the remote control, the display will be illuminated again.
10. RESET
• Press the RESET button to reset the unit to factory
settings.
DEHUM
TIMER
UP
SLEEP
LOCK
TIMER
ON/OFF
F/C
TIMER
DOWN
LIGHT RESET
TEMP DOWN
QUIET
HIGH MED AUTO
COOLFAN
ENERGY
SAVE
TEMP UP
CONTROLS
Loading ...
Loading ...
Loading ...