Loading ...
Loading ...
Loading ...
2. Put one level measure of pre-ground coffee
into the funnel (fig. 14).
3. Place a cup under the coffee spouts.
4. Press the 1 cup coffee button (fig. 6).
Regulating the coffee mill
The coffee mill is preset in the factory to prepare
coffee correctly and should not require regulating
initially.
However, if after making the first few coffees you
find that run-off is either too fast or too slow
(drips), this can be corrected by adjusting the
grinding coarseness regulator knob (fig. 7).
For slower run-off and
creamier coffee, turn
one click towards the "1"
(finer ground coffee).
For faster run-off (with-
out dripping, turn one
click towards the "7"
(coarser ground cof-
fee).
These adjustments will only be evident after at
least 2 cups of coffee have been run off.
NB!
The grinding coarseness regulator
must only be turned when the coffee mill is in
operation (After coffee button has been pressed
and you hear the grinder working.) Only adjust
grinder one setting at a time.
MAKING MILK-BASED
DRINKS
Filling and attaching the milk
container
1. Turn the lid of the milk container clockwise
until it becomes noticeably difficult to turn,
then remove the lid.
2. Fill the milk container with a sufficient quanti-
ty of milk, not exceeding the MAX level
marked on the handle (fig. 15).
NB!
You should ideally use skimmed or
2% milk at refrigerator temperature (about 41°F).
3. Make sure the milk intake tube (B4) is cor-
rectly inserted in the bottom of the milk con-
tainer lid (fig. 16).
4. Replace the milk container lid and turn coun-
terclockwise as far as it will go.
5. Remove the hot water spout from the nozzle
(fig. 17).
6. Attach the container to the nozzle, pushing as
far as it will go (fig. 18).
7. Place a sufficiently large cup under the coffee
spouts (A14) and the frothed milk spout (fig.
19). If necessary, move the frothed milk spout
slightly outwards (B5 - fig. 19).
Making cappuccino
1. Fill the milk container (B) with milk and attach
it as described in the section "Filling and
attaching the milk container".
2. Position the milk frother slide (B1) between
the words CAPPUCCINO and CAFFELATTE
printed on the milk container lid cover. The
quantity of froth can be adjusted by moving
the slide towards the word CAFFELATTE for a
denser froth. Moving it towards the word
CAPPUCCINO obtains a less dense froth.
14
"Less dense"
froth
NO froth
"Denser" froth
regulator
Loading ...
Loading ...
Loading ...